TM-9-2350-261-10 Operator Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 247 of 764
TM 9-2350-261-10 FUEL CARRIER (M577A2 AND M1068 ONLY) — Continued 0031 00 C A U T I O N Contamination can damage fuel system. Remove dirt and water from fuel filler area before opening fuel filler cap. 4. Clean off any dirt and water that could get into filler neck. Use wiping rag. NOTE Carrier may have optional cap with pressure relief valve. 5. Unscrew filler cap. If fuel cap has pressure relief valve, remove by lifting pressure relief valve handle on fuel cap and turn cap counterclockwise. 6. Check screen in filler neck. If there is any dirt in screen, take screen out and clean it. Install screen before fueling. WARNING Sparks from static electricity can cause a fire or explosion. Fuel cans should be removed before being filled. Metal nozzle must touch metal in filler neck when filling or ground wire must be attached to fuel can being filled. Fuel can catch fire and burn you. Do not smoke. Wipe up spilled fuel. 7. Insert nozzle in fuel filler neck. Fill fuel tank, allowing 5 inches in fuel filler neck for expansion. 8. Remove fuel nozzle from fuel filler neck. 0031 00-3