Sign up to sell your inventory with NSN Lookup

TM-9-2350-261-10 Operator Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 222 of 764

TM 9-2350-261-10 START ENGINE WITH OUTSIDE POWER SOURCE — Continued 0027 00 NOTE Do Step 3 if your carrier is equipped with an M8 alarm system. If you do Step 3, connect leads and install distribution box cover after starting problem has been corrected. 3. Remove distribution box cover and disconnect M182 mount cable leads 509B and 509C before jump-starting. WARNING Electrical slave cable can be improperly connected causing electrical spark or fire. Personnel can be killed or injured. Equipment can be damaged. Match connector guide lug and cable prongs with receptacle hole. 4. Connect slave cable to auxiliary power receptacle on disabled carrier. 5. Connect slave cable to auxiliary power receptacle on source carrier. 6. Start engine of source carrier (WP 0026 00). 7 . Turn MASTER SWITCH to ON in disabled vehicle. 0027 00-2