TM-9-2350-247-20-3 Unit Maintenance Manual Volume 3 M548A1 M548A3 Tracked Cargo Carrier Download
Page 733 of 832
TM 9-2350-247-20-3 MAINTENANCE ALLOCATION CHART (MAC)—Continued 0540 00 0540 00-21 EQUIPMENT REF CODE MAINTENANCE LEVEL NOMENCLATURE NATIONAL STOCK NUMBER TOOL NUMBER 23 H PISTON RING RETAINER: USED TO REPLACE PISTON PIN RETAINERS 5120-00-733-8874 10881874 (19207) 24 H REMOVER AND REPLACER: USED TO REMOVE AND INSTALL CAMSHAFT BEARINGS 5180-00-591-6630 10949461 (19207) 25 H PULLER KIT: USED TO REMOVE CAMSHAFT GEAR AND BLOWER GEARS 5120-00-338-6721 8708724 (19207) 26 H PULLER, MECHANICAL: USED TO REMOVE CRANKSHAFT TIMING GEAR 5120-00-740-3345 KM-J-4871 (33287) 27 H REPLACER, CRANKSHAFT TIMING GEAR: USED TO INSTALL CRANKSHAFT TIMING GEAR ON CRANKSHAFT 4910-00-736-1371 10949377 (19207) 28 F REMOVER, VALVE GUIDE: USED TO REMOVE VALVE GUIDE 4910-00-591-6632 KM-J-777 (33287) 29 F REPLACER, VALVE GUIDE: USED TO INSTALL VALVE GUIDE 5120-00-872-6014 KM-J-972 (33287) 30 H REPLACER, VALVE SEAT INSERT: USED TO INSTALL VALVE SEAT INSERTS IN CYLINDER HEAD 4910-00-603-8925 10949451 (19207) 31 H TOOL KIT, VALVE SEAT INSERT: USED TO REMOVE VALVE SEAT INSERTS 5180-00-591-6631 10949470 (19207) 32 F COMPRESSOR, VALVE SPRING: USED WITH 5120-00-999-4052 COMPRESSOR TO REMOVE EXHAUST VALVE SPRINGS 5120-00-733-8888 10881882 (19207) 33 F ADAPTER, VALVE SPRING COMPRESSOR: USED WITH 5120-00- 733-8888 COMPRESSOR TO REMOVE EXHAUST VALVE SPRINGS 4910-00-918-0583 J-7455-4 (33287) 34 F GAUGE, THICKNESS: USED TO CHECK VALVE CLEARANCE 5120-00-273-8527 KM-J-9708 (33287) 35 H INSTALLER, OIL PUMP DRIVE GEAR: USED TO INSTALL OIL PUMP DRIVE GEAR 4910-00-591-6639 10949379 (19207) Change 1