TM-9-2350-247-20-3 Unit Maintenance Manual Volume 3 M548A1 M548A3 Tracked Cargo Carrier Download
Page 68 of 832
TM 9-2350-247-20-3 RAISE/LOWER CARGO COMPARTMENT FLOOR PLATES — Continued 0393 00 3. If rear lifting eyes (7) need to be stowed, remove eight screws (8) that secure lifting eyes on sponson (9). Fasten lifting eyes in stowed position on hull crossmember (10) (see your -10). INSTALLATION NOTE If adjusting floor plate mounting blocks (6) for high floor position, install seven mounting blocks on each sponson (9). If adjusting floor plate mounting blocks for low floor position, install four mounting blocks (6) along front of each sponson. Stow other six mounting blocks on the hull crossmember (10). 1. Put 14 floor plate mounting blocks (6) in place. Secure with 28 screws (4) and washers (5). 2. Put floor plates (3) in place. Secure with 14 spacers (2) and screws (1). END OF TASK 0393 00-2