TM-9-2350-247-20-3 Unit Maintenance Manual Volume 3 M548A1 M548A3 Tracked Cargo Carrier Download
Page 567 of 832
TM 9-2350-247-20-3 REPLACE TURN SIGNAL CONTROL/MOUNT 0508 00 THIS WORK PACKAGE COVERS: Removal (page 0508 00-1). Installation (page 0508 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) M a t e r i a l s / P a r t s Lock nut (3) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) REMOVAL NOTE Removal and installation procedures for turn signal control/mount is similar for M548A1 and M548A3. M548A3 turn signal control does not have a bracket. M548A1 is shown. For M548A1, do Step 4 and Step 1. 1. Remove light lens (1) and lamp (2) from turn signal control handle (3). 2. Disconnect harness connector (4) from turn signal control (5). 3. Loosen clamp (6) that secures turn signal control (5) to mount (7). Remove turn signal control. 4. Remove three lock nuts (8), six washers (9), and three screws (10) that secure mount (7) to range selector housing (11). Remove mount. Discard lock nuts. 0508 00-1