TM-9-2350-247-20-3 Unit Maintenance Manual Volume 3 M548A1 M548A3 Tracked Cargo Carrier Download
Page 542 of 832
TM 9-2350-247-20-3 ADJUST/ALIGN COMPRESSOR DRIVE PULLEY/BELTS (M548A1) — Continued 0498 00 ALIGN 1. Turn adjusting nut (1) to the left until compressor drive belts (2) are loose. 2. Loosen four compressor mounting screws (5). 3. Position compressor to align compressor pulley (3) with drive pulley (4) in the same plane within 1/8 inch (3 mm) of each other. 4. Tighten four compressor mounting screws (5). 5. Adjust drive belt tension. Go to Step 1 and Step 2. FOLLOW-THROUGH STEPS 1. Install compressor drive belt guard (WP 0497 00). 2. Install power plant rear access cover/door (see your -10). 3. Install bulkhead protector, if material handling kit is installed (WP 0487 00). END OF TASK 0498 00-2