Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-247-20-3 Unit Maintenance Manual Volume 3 M548A1 M548A3 Tracked Cargo Carrier Download

Page 471 of 832

TM 9-2350-247-20-3 REPLACE BEAM/BEAM SUPPORTS/STOPS — Continued 0483 00 INSTALLATION NOTE Bend or close S-hooks so they will not interfere with pin removal and installation. 1. Place beam support (4) on bolt-on bow support (13). Secure with retaining pin (12). NOTE Beams can be placed in several positions. If beam is to be angled, one beam support must be at center of bolt-on bow support (see your -10). 2. Install beam (14) on two beam supports (4). Tighten beam locks (3). C A U T I O N When you install beam, make sure center stops are in front of rear beam support and beam locks are toward front. NOTE To prepare hoist and beam for travel, see your -10. 3. Install two center stops (15) at each beam support (4) with screw (16) and new lock nut (17). FOLLOW-THROUGH STEPS 1. Install hoist (WP 0484 00). END OF TASK 0483 00-3/4 blank