TM-9-2350-247-20-3 Unit Maintenance Manual Volume 3 M548A1 M548A3 Tracked Cargo Carrier Download
Page 469 of 832
TM 9-2350-247-20-3 REPLACE BEAM/BEAM SUPPORTS/STOPS 0483 00 THIS WORK PACKAGE COVERS: Removal (page 0483 00-1). Disassembly (page 0483 00-2). Assembly (page 0483 00-2). Installation (page 0483 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) M a t e r i a l s / P a r t s Lock nut Lock washer (2) P e r s o n n e l R e q u i r e d Unit Mechanic Helper (H) R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Hoist removed (WP 0484 00) REMOVAL NOTE There are two beam supports. They are each removed and installed the same way. 1. Remove screw (1), lock nut (2), and two center stops (3) from beam (4). Discard lock nut. NOTE Beams are heavy and awkward. Use helper to remove and install beams. 2. Loosen beam lock (5) on each beam support (6). Slide beam (4) out of supports. 3. Turn retaining pin handle (7) of retaining pin (8) up and pull pin from beam support (6). Remove support from bolt-on bow support (9). 0483 00-1