TM-9-2350-247-20-3 Unit Maintenance Manual Volume 3 M548A1 M548A3 Tracked Cargo Carrier Download
Page 463 of 832
TM 9-2350-247-20-3 REPLACE ENGINE COOLANT HEATER EXHAUST SYSTEM (M548A1) — Continued 0480 00 INSTALLATION 1. Install moisture trap (1) in exhaust pipe (2). Secure with clamp (3). 2. Place exhaust pipe (2) on coolant heater (4). Secure with clamp (5). 3. Install exhaust pipe (6) over exhaust pipe (2). Secure with clamp (7). 4. Secure exhaust pipe (2), exhaust pipe (8), and exhaust pipe (6) to two weld nuts (9) with two clamps (10), new lock nut (11), six washers (12), and three screws (13). 5. Place hood (14) on exhaust pipe (8) and exhaust pipe (6). Secure with three screws (15), new lock washers (16), and nuts (17). FOLLOW-THROUGH STEPS 1. Connect battery negative lead (WP 0292 00). 2. Install top left access grille (WP 0390 00). 3. Install engine coolant heater exhaust guard (WP 0479 00). END OF TASK 0480 00-3/4 blank