TM-9-2350-247-20-3 Unit Maintenance Manual Volume 3 M548A1 M548A3 Tracked Cargo Carrier Download
Page 381 of 832
TM 9-2350-247-20-3 REPLACE LOWER CAB INSULATION 0459 00 THIS WORK PACKAGE COVERS: Removal (page 0459 00-1). Installation (page 0459 00-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) M a t e r i a l s / P a r t s Cleaning compound (WP 0542 00, Item 9) Insulation P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) REMOVAL NOTE Remove lower cab insulation only if inspection shows replacement is needed. These instructions are for removal of damaged panels or damaged areas of panels. 1. Remove as much old damaged insulation as you can by scraping. Make edges even. Cut patch to fit. 2. Remove remaining insulation and dried adhesive with cleaning compound. INSTALLATION 1. Trim new insulation to fit. If panel to be installed is large, cut it into squares of about 3 feet (1 meter). 2. Spray or swab cleaning compound on back of insulation to activate adhesive. 3. Allow 10 to 15 seconds for adhesive to become tacky. Press insulation firmly into place at once. END OF TASK 0459 00-1/2 blank