TM-9-2350-247-20-3 Unit Maintenance Manual Volume 3 M548A1 M548A3 Tracked Cargo Carrier Download
Page 27 of 832
TM 9-2350-247-20-3 REPLACE HULL BOTTOM ACCESS COVER AND DRAIN COVER 0383 00 THIS WORK PACKAGE COVERS: Removal (page 0383 00-1). Installation (page 0383 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) M a t e r i a l s / P a r t s Locknut (14) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) REMOVAL WARNING Moving carrier can cause injury or death. Block carrier so it won’t move before removing or installing access covers. NOTE Hull bottom access covers for M548A1 and M548A3 are different. Both access covers are shown. Do Step 1 for M548A1 hull bottom access covers, then go to Step 3. Do Step 2 for M548A3 hull bottom access cover, then go to Step 3. Drain covers for M548A1 and M458A3 are the same and are removed and installed the same way. 1. Remove eight screws (1) and washers (2) that secure access cover (3) and gasket (4) to hull bottom. Remove cover and gasket. 0383 00-1