TM-9-2350-247-20-3 Unit Maintenance Manual Volume 3 M548A1 M548A3 Tracked Cargo Carrier Download
Page 214 of 832
TM 9-2350-247-20-3 REPLACE BILGE PUMP DISCHARGE TUBES AND HOSES (M548A1) — Continued 0425 00 INSTALLATION 1. Install two hoses (6) on each end of tube (4). Connect hoses to tube (7) and bilge pump (8). Tighten four clamps (5). 2. Install two clamps (3) on tube (4) and secure to hull with two screws (1) and washers (2). FOLLOW-THROUGH STEPS 1. Lower cab center floor plates (WP 0394 00). 2. Install right seat (WP 0400 00). END OF TASK 0425 00-2