Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-247-20-3 Unit Maintenance Manual Volume 3 M548A1 M548A3 Tracked Cargo Carrier Download

Page 200 of 832

TM 9-2350-247-20-3 REPLACE WINDSHIELD WIPER LINKAGE — Continued 0421 00 REMOVAL 1. Remove two clips (1) and washers (2) from link (3). Pull link from motor (4) and pivot (5). 2. Remove two clips (1) and washers (2) from link (6). Pull link from pivot (7) and pivot (8). Remove spacer (9) from pivot (8). 3. Pull link (10) from pivot (5) and pivot (7). NOTE There are three arm and blade assemblies and tapered bushings, only one is shown. All are removed in the same way. 4. Remove nut (11), lockwasher (12), and arm and blade assembly (13) from pivot (8). Remove tapered bushing (14) from pivot (8). Remove arm and blade assemblies from pivots (5) and (7) the same way. Discard lockwasher. 5. Remove locknut (15) and screw (16) from pivot (8). Pull pivot (8) with spacer (9) from carrier. Remove pivot (5) and pivot (7) the same way. Discard locknut. 0421 00-2 Change 1