TM-9-2350-247-20-3 Unit Maintenance Manual Volume 3 M548A1 M548A3 Tracked Cargo Carrier Download
Page 197 of 832
TM 9-2350-247-20-3 REPLACE WINDSHIELD WIPER MOTOR 0420 00 THIS WORK PACKAGE COVERS: Removal (page 0420 00-1). Installation (page 0420 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) M a t e r i a l s / P a r t s Locknut Lockwasher Lockwasher Lockwasher (6) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Battery negative lead(s) disconnected (WP 0292 00) REMOVAL 1. Pull nipple (1) away from screw (2). Remove screw (2), two lockwashers (3), lead (4), and capacitor lead (5) from windshield wiper motor (6). Discard lockwashers. 2. Remove screw (7) and capacitor (8) from weldnut (9). 3. Remove tension clip (10), washer (11), and link (12) from pivot post on windshield wiper motor (6). 4. Remove three screws (13) and six lockwashers (14) that secure windshield wiper motor (6) to bracket (15). Remove locknut (16), screw (17), and clamp (18). Discard locknut and lockwashers. 5. Lift windshield wiper motor (6) from carrier. 0420 00-1 Change 1