TM-9-2350-247-20-3 Unit Maintenance Manual Volume 3 M548A1 M548A3 Tracked Cargo Carrier Download
Page 161 of 832
TM 9-2350-247-20-3 REPLACE WINCH PROPELLER SHAFT (M548A1) — Continued 0412 00 INSTALLATION 1. Place assembled propeller shaft (1) between yoke (2) on power takeoff (3) and yoke (4) on transfer gearcase (5). 2. Place two clamps (6) over yoke (2). Secure each clamp with two new lock washers (7) and two nuts (8). Tighten nuts to 14-17 lb-ft (19-23 N•m) torque. 3. Place two clamps (6) over yoke (4). Secure each clamp with two new lock washers (7) and nuts (8). Tighten nuts to 14-17 lb-ft (19-23 N•m) torque. FOLLOW-THROUGH STEPS 1. Install cab center floor plate (WP 0394 00). 2. Install air cleaner container with element (WP 0152 00). 3. Install left grille (WP 0390 00). 4. Lower center seat (see your -10). 5. Connect battery negative lead (WP 0292 00). END OF TASK 0412 00-5/6 blank