TM-9-2350-247-20-3 Unit Maintenance Manual Volume 3 M548A1 M548A3 Tracked Cargo Carrier Download
Page 147 of 832
TM 9-2350-247-20-3 ADJUST DRUM BRAKE SHOE (M548A1) 0408 00 THIS WORK PACKAGE COVERS: Adjustment (page 0408 00-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped/shutdown (see your -10) Carrier blocked (see your -10) Battery negative lead disconnected (WP 0292 00) Unlock drum (see your -10) ADJUSTMENT NOTE Drum should turn when wire rope is pulled from winch by hand. It should stop when pulling stops. Adjust drum shoe if it is too tight or too loose. 1. If wire rope cannot be pulled from winch by hand, loosen screw (1) until drum moves when rope is pulled. 2. If drum keeps turning when pulling stops, tighten screw (1) until drum stops when pulling stops. FOLLOW-THROUGH STEPS 1. Connect battery negative lead (WP 0292 00). 2. Lock drum (see your -10). END OF TASK 0408 00-1/2 blank