TM-9-2350-247-20-3 Unit Maintenance Manual Volume 3 M548A1 M548A3 Tracked Cargo Carrier Download
Page 141 of 832
TM 9-2350-247-20-3 REPLACE WINCH (M548A1) — Continued 0407 00 WARNING Winch weighs more than 400 lbs (181 kg). Use a lifting device with at least 500 lb (227 kg) capacity to hold winch before removing mounting screws, to prevent personnel injury or property damage. 4. Remove four screws (1) and two plates (2) from inside power plant compartment. 5. Use helper and lifting device toremove winch from carrier. If winch cannot be moved, remove screw (3) from winch transfer gear case, and insert a 3/4UNCx6 inch screw. Turn screw until winch moves. 6. Remove gasket (4) from around input shaft (5). Discard gasket. Remove key (6) from shaft. 7. Remove two gaskets (7) from around two pairs of mounting holes on winch. Discard gaskets. 0407 00-3