TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 991 of 1072
TM 9-2350-247-20-2 REPLACE PIVOT STEERING CLUTCH DISK (M548A1) 0374 00 THIS WORK PACKAGE COVERS: Removal (page 0374 00-1). Installation (page 0374 00-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) Torque Wrench (WP 0541 00, Item 69) M a t e r i a l s / P a r t s Lock nut (8) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Right and left center seat floor plates raised (WP 0394 00) Throttle floor plate removed (WP 0394 00) Cab left floor plate removed (WP 0394 00) Pivot steering brakes removed (WP 0373 00) Propeller shafts and universal joints removed (WP 0332 00) REMOVAL 1. Remove eight lock nuts (1), two adapters (2), and clutch disks (3) from four differential studs (4). Discard lock nuts. INSTALLATION 1. Place two clutch disks (3) and adapters (2) on four differential studs (4). Secure with eight new lock nuts (1). Tighten lock nuts to 75 to 80 lb-ft (102 to 108 N•m) torque. 0374 00-1