TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 987 of 1072
TM 9-2350-247-20-2 REPLACE PIVOT STEERING BRAKE ASSEMBLY (M548A1) 0373 00 THIS WORK PACKAGE COVERS: Removal (page 0373 00-1). Installation (page 0373 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) Torque Wrench (WP 0541 00, Item 69) M a t e r i a l s / P a r t s Hydraulic fluid (WP 0542 00, Item 18) Sealing compound (WP 0542 00, Item 36) Preformed packing (2) Preformed packing (6) Suitable container P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 See your -PMCS E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Right and left center seat floor plates raised (WP 0394 00) Throttle floor plate removed (WP 0394 00) Cab left floor plate removed (WP 0394 00) REMOVAL NOTE Place containers under brake bleeders. 1. Open four brake bleeders (1). Operate hand lever (2) and hand lever (3) until two hydraulic cylinders (4) have been drained. 2. Remove quick disconnect coupler (5) from elbow (6) and hose (7). Disconnect coupler and remove preformed packing (8). Discard preformed packing. 0373 00-1