Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download

Page 969 of 1072

TM 9-2350-247-20-2 REPLACE PIVOT STEERING BRAKE CONTROLS/LINKAGE (M548A1) — Continued 0369 00 NOTE Be careful in partially removing instrument panel. Do not disconnect instrument or light connectors. Connect any lead immediately if connector is disconnected. 3. Partially remove instrument panel (WP 0256 00). 4. Install pivot steering assembly (1) on mounting by rotating assembly upward and forward. 5. Support pivot steering assembly (1). To secure pivot steering support (2) to mounting, install two washers (3) and screws (4) through lower mounting holes. 6. Install two tube nuts (5) and sleeves (6) to connect two tubes (7) to two elbows (8) on two master cylinders (9). 7. Install two washers (10) and screws (11) through upper mounting holes to secure pivot steering support (2) to mounting. FOLLOW-THROUGH STEPS 1. Install instrument panel (WP 0256 00). 2. Connect battery negative lead (WP 0292 00). END OF TASK 0369 00-9/10 blank