TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 962 of 1072
TM 9-2350-247-20-2 REPLACE PIVOT STEERING BRAKE CONTROLS/LINKAGE (M548A1) — Continued 0369 00 REMOVAL NOTE Be careful in partially removing instrument panel. Do not disconnect instrument or light connectors. Connect any lead immediately if connector is disconnected. 1. Partially remove instrument panel (WP 0256 00). 2. Remove two screws (1) and washers (2) from pivot steering support (3) from upper mounting holes on mounting. 3. Temporarily install instrument panel (WP 0256 00). NOTE Place container under master cylinders to catch hydraulic fluid. 4. Remove two tube nuts (4) securing two sleeves (5) and tubes (6) to two elbows (7) on master cylinders (8). 5. Support pivot steering assembly (9) while removing two screws (10) and washers (11) from lower mounting holes on mounting. 6. Remove pivot steering assembly (9) from mounting by turning assembly downward and backward. 0369 00-2