TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 914 of 1072
TM 9-2350-247-20-2 REPLACE T150 TRACK ROAD WHEEL — Continued 0361 01 INSTALLATION 1. Lift track assembly with bar. Place two road wheels (1) on road wheel arm (2). Secure loosely with eight washers (3) and new lock nuts (4). 2. Unblock carrier (see your -10). WARNING You can be hurt if road wheel lifter slips while road arm is being lowered. Stand clear. 3. Start engine (see your -10). Place range selector in RANGE 1. Slowly drive carrier forward off lifter (5). Remove lifter. WARNING Failure to set the parking brake and block the road wheels can allow the carrier to move and could result in injury or death. Always set the parking brake and block road wheels before working on the carrier. 4. Remove two T-nuts (6), screws (7), flat washers (8), and retainer (9) from lifter (5) and remove road wheel lifter assembly from track. 5. Block carrier (see your -10). 6. TIGHTEN EIGHT LOCK NUTS (4) TO 150-170 LB-FT (203-230 N·M) TORQUE. Use torque wrench. 0361 01-4 Change 1