TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 912 of 1072
TM 9-2350-247-20-2 REPLACE T150 TRACK ROAD WHEEL — Continued 0361 01 2. Loosen eight lock nuts (7) on road wheel (9). Do not remove nuts. WARNING Position retainer stops inside of end connector to prevent the lifter from slipping off and causing injury or death to personnel. 3. Install retainer (4), two flat washers (3), screws (2) , and T-nuts (1) on inside of track assembly. 4. Place lifter (5) under road wheel arm (6). Keep lower tips of lifter in track link just rearward of wheel being removed. 5. Unblock carrier (see your -10). WARNING If road wheel lifter slips while lowering road arm, it could injure you. Stand clear before you lower road arm. 6. Start engine (see your -10). Place gear selector in R. Slowly back carrier until lifter (5) is vertical and road wheel (9) clears ground. WARNING Failure to set the parking brake and block the road wheels can allow the carrier to move and could result in injury or death. Always set the parking brake and block road wheels before working on the carrier. 7. Block carrier (see your -10). 0361 01-2 Change 1