TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 904 of 1072
TM 9-2350-247-20-2 REPLACE IDLER WHEEL — Continued 0360 00 INSTALLATION 1. Place two idler wheels (2) on idler wheel hub (3) with spokes of idler wheels not aligned. 2. Secure two idler wheels (2) to idler wheel hub (3) with eight new idler wheel lock nuts (1). Tighten lock nuts to 150-170 lb-ft (203-230 N•m) torque. 3. Install track over idler wheels (2). FOLLOW-THROUGH STEPS 1. Connect track and adjust tension (see your -10). 2. Remove blocks used to keep carrier from moving (see your -10). 3. Start engine (see your -10). 4. Road test carrier (WP 0128 00) to check that idler wheel is installed properly. 5. Stop engine (see your -10). END OF TASK 0360 00-2