TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 887 of 1072
TM 9-2350-247-20-2 REPAIR T150 DRIVE SPROCKET WHEEL ASSEMBLY — Continued 0357 02 4. Place sprocket wheel assembly (2) on final drive (1). Secure with 10 new self-locking screws (3). Have helper assist. 5. TIGHTEN 10 SCREWS (3) TO 170-190 LB-FT (231-258 N·M) TORQUE. Use torque wrench. FOLLOW-THROUGH STEPS 1. Install track on drive sprockets (WP 0358 01). 2. Join track (see your -10). 3. TIGHTEN TWO END CONNECTOR BOLTS (9) TO 400-430 LB-FT (543-583 N·M) TORQUE. Use torque wrench. 4. Adjust track tension (see your -10). 5. Road test vehicle to check that drive sprocket and cushion are installed properly (WP 0128 00). END OF TASK 0357 02-3/4 blank Change 1