TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 886 of 1072
TM 9-2350-247-20-2 REPAIR T150 DRIVE SPROCKET WHEEL ASSEMBLY — Continued 0357 02 2. Remove 20 self-locking screws (4), two drive sprockets (5), and rings (6) from sprocket wheel (8). Discard self-locking screws. 3. Remove two rubber cushions (7) from sprocket wheel (8). INSTALLATION NOTE Procedures for repairing left and right sprocket wheel assemblies are the same. 1. Place two rubber cushions (7) on sprocket wheel (8). Center short flat areas between mounting holes in sprocket wheel rim. Press on rubber cushions until firmly seated against flange of carriers. 2. Install two rings (6), two sprockets (5), and 20 new self-locking screws (4) on sprocket wheel (8). 3. TIGHTEN 20 SCREWS (4) TO 110-115 LB-FT (149-156 N·M) TORQUE. Use torque wrench. 0357 02-2 Change 1