Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download

Page 876 of 1072

TM 9-2350-247-20-2 REPLACE TRACK TENSION ADJUSTER AND MOUNT — Continued 0356 00 7. Rotate mount (6). Install two screws (8). NOTE When using torque wrench with torque wrench adapter, torque value must becorrected. Procedure for converting torque value is on (WP 0001 00). 8. Tighten screw (7) and two screws (8) to 130-140 lb-ft (176-190 N•m) torque. Use adapter. 9. Install washer (9) and screw (10) on mount (6). Tighten screw to 130-140 lb-ft (176-190 N•m) torque. FOLLOW THROUGH STEPS 1. Connect and adjust track (see your -10). 2. Start engine (see your -10). 3. Road test carrier (WP 0128 00) to check that adjuster is installed properly. 4. Stop engine (see your -10). END OF TASK 0356 00-4