TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 875 of 1072
TM 9-2350-247-20-2 REPLACE TRACK TENSION ADJUSTER AND MOUNT — Continued 0356 00 INSTALLATION 1. Install relief valve (1) and grease fitting (2) in track tension adjuster (3). NOTE Grease fitting and relief valve of track tension adjuster should be toward front of carrier. Make sure grease fitting is pointing out. 2. Install track tension adjuster (3) on shaft of idler wheel arm. Secure with screw (4) and washer (5). Tighten screw to 130-140 lb-ft (176-190 N•m) torque. NOTE If carrier has new type spindle, omit Step 3 and Step 5. 3. Install idler wheel arm with track tension adjuster attached (WP 0354 00). 4. Install mount (6) in front of track tension adjuster (3). Raise adjuster and mount. Align hole in mount with hole in hull for screw (7). 5. Install idler wheel (WP 0360 00). 6. Install screw (7) in mount (6). Tighten until snug. 0356 00-3