TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 874 of 1072
TM 9-2350-247-20-2 REPLACE TRACK TENSION ADJUSTER AND MOUNT — Continued 0356 00 REMOVAL NOTE If carrier has new type spindle, omit Step 1 and Step 3. 1. Remove idler wheel (WP 0360 00). 2. Remove screw (1) and washer (2) from mount (3). 3. Remove idler wheel arm assembly, with track tension adjuster attached (WP 0354 00). 4. Remove screw (4) and washer (5) from shaft on idler arm. 5. Remove two screws (6) from mount (3). Loosen screw (7). Rotate mount and remove screw (7). 6. Pull track tension adjuster (8) down. Remove mount (3) from adjuster. 7. Remove track tension adjuster (8) from shaft on idler arm. 8. Remove grease fitting (9) and relief valve (10) from track tension adjuster (8). 0356 00-2