TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 839 of 1072
TM 9-2350-247-20-2 REPLACE TORSION BAR 0349 00 THIS WORK PACKAGE COVERS: Removal (page 0349 00-1). Installation (page 0349 00-4). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s Adapter (WP 0541 00, Item 4) General Mechanic’s Tool Kit (WP 0541 00, Item 57) Road Wheel Lifter (WP 0541 00, Item 27) Slide Puller (WP 0541 00, Item 37) Socket Head Cap Screw (WP 0541 00, Item 44) Socket Attachment Wrench (WP 0541 00, Item 66) Torque Wrench (WP 0541 00, Item 69) M a t e r i a l s / P a r t s GAA Grease (WP 0542 00, Item 14) P e r s o n n e l R e q u i r e d Unit Mechanic Helper (H) R e f e r e n c e s See your -10 WP 012 8 00 E q u i p m e n t C o n d i t i o n Carrier on level surface Engine stopped (see your -10) Carrier blocked (see your -10) Road wheel removed (T130) (WP 0361 00) or (T150) (WP 0361 01) Shock absorber removed from first, second, or fifth road wheel (WP 0379 00) Power plant removed for first and second torsion bar (WP 0130 00) Floor plates removed for third, fourth, and fifth torsion bar (WP 0393 00) REMOVAL WARNING If road wheel lifter slips while lowering road arm, it could injure you. Stand clear before you lower or raise road arm. 1. With road wheel removed and road arm raised on lifter, start engine (see your -10). Place range selector in 1. Slowly drive carrier forward off lifter so that road wheel support arm hangs freely. 0349 00-1 Change 1