TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 812 of 1072
TM 9-2350-247-20-2 ADJUST PARKING BRAKE (M548A3) — Continued 0345 00 3. Hold brake pedal down until it stops. Have helper assist. 4. Loosen jam nut (4). Adjust control assembly cable (3) in bracket (5) until end of slot in stop (6) is against clevis pin (7). 5. Turn brake lever adjustment knob (2) on parking lever (1) clockwise to remove remaining slack in control assembly cable (3). Pull lever up until it locks in place. 6. Release brake pedal. Brake pedal should not move. If pedal does move, repeat Steps 2 - 6 until brake pedal does not move when parking brake is applied ON. FOLLOW-THROUGH STEPS 1. Apply parking brake (see your -10). 2. Install driver’s floor plate (WP 0395 00). END OF TASK 0345 00-2