Sign up to sell your inventory with NSN Lookup

TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download

Page 81 of 1072

TM 9-2350-247-20-2 REPLACE FUEL COMPARTMENT TUBES, HOSES, AND FITTINGS (M548A3) 0166 00 THIS WORK PACKAGE COVERS: Removal (page 0166 00-1). Installation (page 0166 00-6). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) M a t e r i a l s / P a r t s Sealing compound (WP 0542 00, Item 37) Grommet (3) Lock washer (14) Preformed packing Seal (2) Suitable container P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Both battery negative leads disconnected (WP 0292 00) Cargo compartment floor plates removed (WP 0393 00) Fuel compartment access covers removed (WP 0163 00) Fuel compartment drained (WP 0162 00) Power plant rear access panel removed (see your -10) Top access cover and grilles removed (see your -10) REMOVAL NOTE Removal of all tubes, hoses, and fittings is not usually needed for maintenance. Remove only those parts needed to do the task. Remove tubes and hoses with clamps attached. Attach clamps to replacement tubes and hoses. 1. Remove eight screws (1), lock washers (2), four metal straps (3), and rubber strips (4) from four blocks (5) that secure tubes to hull. Discard lock washers. 0166 00-1