TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 763 of 1072
TM 9-2350-247-20-2 REPLACE FINAL DRIVE SHAFTS (M548A3) — Continued 0335 00 INSTALLATION 1. Insert yoke (1) in final drive (2). 2. Install spider (3) and spider (4) on final drive shaft (5) with eight washers (6) and new screws (7). 3. Torque screws (7) to 86-94 ft-lb (117-127 N•m). Loosen screws and torque again to 86-94 lb-ft (117-127 N•m). 4. Install spider (4) with final drive shaft (5) on yoke (8) with four washers (9) and new screws (10). 5. Torque screws (10) to 86-94 ft-lb (117-127 N•m). Loosen screws and torque again to 86-94 lb-ft (117-127 N•m). 6. Install spider (3) to yoke (1) with four washers (11) and new screws (12). 7. Torque screws (12) to 86-94 ft-lb (117-127 N•m). Loosen screws and torque again to 86-94 lb-ft (117-127 N•m). FOLLOW-THROUGH STEPS 1. Install cab floor plates (WP 0395 00). END OF TASK 0335 00-3/4 blank