TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 755 of 1072
TM 9-2350-247-20-2 REPLACE LEFT FINAL DRIVE SHAFT (M548A1) 0333 00 THIS WORK PACKAGE COVERS: Removal (page 0333 00-1). Installation (page 0333 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) Torque Wrench (WP 0541 00, Item 68) M a t e r i a l s / P a r t s Screw (16) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Left center floor plates removed (WP 0394 00) REMOVAL 1. Remove eight screws (1), flat washers (2), and connector (3) from two universal joints (4). Discard screws. 2. Remove eight screws (1), flat washers (2), and two universal joints (4) from yoke (5) and differential (6). Discard screws. 3. Remove yoke (5) from final drive (7). NOTE Some universal joints do not have lubrication fittings. 4. Remove four lubrication fittings (8) from two universal joints (4) if needed. 0333 00-1