TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 736 of 1072
TM 9-2350-247-20-2 REPLACE FINAL DRIVE GAUGE ROD — Continued 0328 00 INSTALLATION NOTE Due to failure of output shaft seal, final drive oil quantity must be increased. To measure correct amount of oil, both final drive gauge rods must be modified as shown in WP 0326 00. 1. Insert gauge rod (1) into final drive (2) and turn to the right to lock. FOLLOW-THROUGH STEPS 1. Install left or right center floor plate (WP 0394 00) or (WP 0395 00). END OF TASK 0328 00-2