TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 732 of 1072
TM 9-2350-247-20-2 REPLACE FINAL DRIVE — Continued 0326 00 7. Secure final drive lifting bar (1) to final drive (2) with two sprocket mounting screws (3). WARNING Final drive is top heavy. Be careful when removing final drive lifting bar after installation. Use helper to install final drive. 8. Attach lifting device to final drive lifting bar (1). Place final drive (2) on hull (6). Have helper assist. 9. Put antiseize compound on threads of 17 screws (4). Secure final drive (2) to hull (6) with 17 screws and washers (5). 10. Tighten 17 screws (4) to 75-85 lb-ft (102-115 N•m) torque. 11. Remove final drive lifting bar (1). Install drive sprocket assembly (WP 0357 00). FOLLOW-THROUGH STEPS 1. Connect track (see your -10). 2. Install left or right final drive shaft (WP 0333 00), (WP 0334 00), or (WP 0335 00). 3. Install left or right center floor plate (WP 0394 00) or (WP 0395 00). 4. Road test carrier (WP 0128 00) to check final drive for proper operation. END OF TASK 0326 00-4