TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 68 of 1072
TM 9-2350-247-20-2 REPLACE AIR CLEANER ELBOW AND INLET DUCT ASSEMBLIES (M548A3) — Continued 0161 00 5. Install two washers (5), new lock washers (14), and screws (15) to secure inlet duct (11) to carrier. Tighten screws to 22 to 24 lb-ft (30 to 33 N•m) torque. 6. Tighten four lock nuts (6) on upper end of inlet duct (11) to 25 to 27 lb-ft (34 to 37 N•m) torque. 7. Position flexible duct (16) on inlet duct (11) and tighten clamp screw. FOLLOW-THROUGH STEPS 1. Lower center seat (see your -10). END OF TASK 0161 00-4