TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 665 of 1072
TM 9-2350-247-20-2 ADJUST TRANSMISSION STEERING (M548A3) 0312 00 THIS WORK PACKAGE COVERS: Inspection of Installed Items (page 0312 00-1). Adjustment (page 0312 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) Steer Centering Adjusting Tool (WP 0541 00, Item 5) Socket Wrench Set (WP 0541 00, Item 64) Torque Wrench (WP 0541 00, Item 69) Torque Wrench (WP 0541 00, Item 70) M a t e r i a l s / P a r t s Preformed packing P e r s o n n e l R e q u i r e d Unit Mechanic Helper (H) R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Cab floor plates removed (WP 0395 00) Seat support removed (WP 0395 00) INSPECTION OF INSTALLED ITEMS WARNING Breathing carbon monoxide fumes from engine exhaust could kill you or injure you. Perform tests outdoors or in well ventilated area. WARNING Clear the area before checking adjustment. Carrier may pivot steer and injure personnel. Place transmission controller in SL before checking adjustment. NOTE See your -10 for all operating procedures. 1. (H) Place transmission controller in SL position. Start engine and allow to reach operating temperature. 2. (H) Release parking brake and let engine run at idle. 0312 00-1