TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 583 of 1072
TM 9-2350-247-20-2 REPAIR WIRING HARNESS — Continued 0294 00 c. If large diameter lead (1), fill crimp (2) on terminal (3) with solder. Use soldering gun. Insert lead into melted solder in crimp. Allow to cool. d. If small diameter lead (4), position terminal (5) on lead. Crimp terminal on lead. Use crimping tool from electrical tool kit. e. Heat shrink those leads with insulated sleeving (6) on terminal (7). Use heat gun. 4. Install multiple connectors the same way as single connectors. See Installation Procedure Step 2 and Step 3. 5. If removed, install Y-type adapters and dummy plugs. a. Install Y-type adapter (8) on harness leads (9). b. Install dummy plugs (10) in male or female connector (11). 0294 00-5