TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 581 of 1072
TM 9-2350-247-20-2 REPAIR WIRING HARNESS — Continued 0294 00 NOTE Unit Maintenance can only repair multipin plugs with up to three sockets. For plugs with more than three sockets, notify your supervisor. 4. Remove multiple connectors the same way as single connectors. Be sure to tag leads to ensure correct installation. See Removal Procedure Step 1 and Step 2. NOTE For wiring harness repair, it may be necessary to remove Y-adapters and dummy plugs. 5. Remove Y-type adapter or dummy plug from harness lead. a. Pull harness leads (8) from Y-type adapter (9). Remove adapter. b. Pull dummy plug (10) from male or female connector (11). INSTALLATION C A U T I O N Crimping lower part of pin may damage pin and it will not hold lead. Crimp only middle part of contact pin with correct size die. Install female connector on harness lead. NOTE If replacing lead, cut new wire from bulk supply. Measure original length, gauge, and type of wire. 1. Install male connector on harness lead. 0294 00-3