TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 580 of 1072
TM 9-2350-247-20-2 REPAIR WIRING HARNESS — Continued 0294 00 2. Remove female connector from harness lead. a. Slide shell (6) back on lead (7). b. Slide sleeve (8) back from contact socket (9). c. Clip socket (9) from lead (7). Discard socket. d. Remove sleeve (8) and shell (6) from lead (7). 3. Remove terminal connector from harness lead. a. If lead (10) has nipple (11), slide nipple back on lead. b. If lead (1) has insulated sleeving (2), cut and discard sleeving from lead. c. If lead (3) is of large diameter, place in vise (4). Cut lead as close as possible to terminal (5). Discard terminal. d. If lead (6) is of small diameter, cut lead as close as possible to terminal (7). Discard terminal. 0294 00-2