TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 551 of 1072
TM 9-2350-247-20-2 REPLACE GENERATOR FIELD SWITCH — Continued 0288 00 INSPECTION-ACCEPTANCE AND REJECTION CRITERIA 1. Check circuit lead. Replace worn or cracked lead and damaged connector (WP 0294 00). Use multimeter to check leads and generator field switch. INSTALLATION WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 1. If replacing plug and washer, coat threads on plug (4) with sealing compound. Install washer (5) and plug (4) on side of switch (2). 2. Coat threads of new switch (2) with sealing compound. 3. Install new generator field switch (2) in tee (3). 4. Connect circuit 1A and 1B lead plug (1) to generator field switch (2). FOLLOW-THROUGH STEPS 1. Connect battery ground lead(s) (WP 0292 00). 2. Lower cab personnel seats (see your -10). END OF TASK 0288 00-3/4 blank Change 1