TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 509 of 1072
TM 9-2350-247-20-2 REPLACE STOPLIGHT SWITCH 0274 00 THIS WORK PACKAGE COVERS: Removal (page 0274 00-1). Installation (page 0274 00-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) M a t e r i a l s / P a r t s Lock nut (2) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Battery negative lead(s) disconnected (WP 0292 00) REMOVAL 1. Disconnect circuit 75 lead (1) and circuit 75A lead (2) from stoplight switch (3). 2. Remove two lock nuts (4), four flat washers (5), and two cap screws (6) from stoplight switch (3) and mounting bracket (7). Discard lock nuts. 3. Remove stoplight switch (3) from mounting bracket (7). INSTALLATION 1. Align stoplight switch (3) with mounting bracket (7). 2. Secure stoplight switch (3) to mounting bracket (7) with two cap screws (6), four flat washers (5), and two new lock nuts (4). 3. Connect circuit 75A lead (2) and circuit 75 lead (1) to stoplight switch (3). 0274 00-1