TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 461 of 1072
TM 9-2350-247-20-2 REPLACE HIGH BEAM INDICATOR LIGHT 0257 00 THIS WORK PACKAGE COVERS: Removal (page 0257 00-1). Installation (page 0257 00-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Battery negative lead(s) disconnected (WP 0292 00) Instrument panel partially removed (WP 0256 00) REMOVAL 1. Disconnect circuit 519 lead (1) and circuit 519A lead (2) from light body (3). 2. Press and turn light lens (4) to the left and remove with gasket (5) from instrument panel (6). 3. Press and turn light bulb (7) to the left and remove from light body (3). 4. Remove two screws (8) and washers (9) from light body (3) and instrument panel (6). Remove light body from panel. INSTALLATION 1. Install light body (3) in instrument panel (6). Install two washers (9) and screws (8) to secure light body to panel. 2. Place light bulb (7) in light body (3). Press and turn light bulb to the right to secure. 3. Place light lens (4) with gasket (5) on instrument panel (6). Press and turn light lens to the right. 4. Connect circuit 519A lead (2) and circuit 519 lead (1) light body (3). 0257 00-1