TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 45 of 1072
TM 9-2350-247-20-2 SERVICE AIR CLEANER FILTER ELEMENT (M548A3) 0155 00 THIS WORK PACKAGE COVERS: Servicing (page 0155 00-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) Industrial Goggles (WP 0541 00, Item 21) Air Blow Gun (WP 0541 00, Item 22) M a t e r i a l s / P a r t s Detergent (WP 0542 00, Item 16) Suitable container P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Center seat raised (see your -10) Air cleaner element removed (WP 0156 00) SERVICING WARNING Failure to decontaminate and wear protective clothing after NBC attack could result in serious health hazards to personnel. Do not service air cleaner or vent system after NBC attack until carrier has been decontaminated. 1. Inspect element for frayed or deformed condition. Replace frayed or deformed element. WARNING Air pressure in excess of 30 psi (207 kpa) can injure personnel. Do not direct pressurized air at yourself or others. Always wear goggles. NOTE Vee Pac element may be cleaned by either or both of the following methods. 2. Using air gun, blow out element with 30 psi (207 kpa) maximum compressed air from inside to outside of element (in direction opposite to normal air flow). 0155 00-1