TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 447 of 1072
TM 9-2350-247-20-2 REPLACE STARTER (M548A1) — Continued 0253 00 INSTALLATION NOTE Check that starter-to-engine housing gasket is in place. Gasket is necessary to keep water out of starter. 1. Install gasket (1) on engine (2). 2. Place starter (3) with solenoid (4) on engine (2). Secure with three new lock washers (5) and bolts (6). Tighten bolts to 137-147 lb-ft (186-199 N•m) torque. Have helper assist. 3. Install new lock washer (7) (Delco and Leece Neville only) and circuit 74A lead (8) on terminal of starter solenoid (4). Secure with nut (9) (screw on Prestolite). 4. Install new lock washer (10) and circuit 6 lead (11) on terminal of solenoid (4). Secure with nut (12). 5. Install new lock washer (13) and two ground leads (14) on terminal of starter (3). Secure with nut (15). FOLLOW-THROUGH STEPS 1. Install power plant (WP 0130 00). END OF TASK 0253 00-3/4 blank