TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 431 of 1072
TM 9-2350-247-20-2 REPLACE GENERATOR MOUNT (M548A3) 0248 00 THIS WORK PACKAGE COVERS: Removal (page 0248 00-1). Inspection-Acceptance and Rejection Criteria (page 0248 00-2). Installation (page 0248 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) Socket Wrench Set (WP 0541 00, Item 64) Torque Wrench (WP 0541 00, Item 71) M a t e r i a l s / P a r t s Lock washer (2) Lock washer (2) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Both battery negative leads disconnected (WP 0292 00) Generator drive belt removed (as required)(WP 0245 00) Generator drive belt adjusting linkage removed (WP 0247 00) Starter relay switch removed (WP 0255 00) Generator removed (WP 0246 00) Hull bottom access cover removed (WP 0383 00) REMOVAL 1. Remove two nuts (1), screws (2), and washers (3) from lower part of generator mount (4). 2. Remove screw (5) and cable clamp (6) from generator mount (4). 3. Remove two screws (7), two screws (8), lock washers (9), lock washers (10), washers (11), washers (12), and generator mount (4) from engine. Discard lock washers. 0248 00-1