TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 429 of 1072
TM 9-2350-247-20-2 REPLACE GENERATOR DRIVE BELT ADJUSTING LINKAGE (M548A3) 0247 00 THIS WORK PACKAGE COVERS: Removal (page 0247 00-1). Inspection-Acceptance and Rejection Criteria (page 0247 00-2). Installation (page 0247 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0541 00, Item 57) Straight Edge (WP 0541 00, Item 50) V-belt Tensiometer (WP 0541 00, Item 59) Socket Wrench Set (WP 0541 00, Item 64) Torque Wrench (WP 0541 00, Item 71) M a t e r i a l s / P a r t s Cotter pin P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Power plant rear access panel removed (see your -10) REMOVAL 1. Loosen two generator mounting screws (1) and jam nut (2) and rotate turnbuckle (3) clockwise to relieve drive belt tension. 2. Remove cotter pin (4), washer (5), and eyebolt (6) of turnbuckle (3) from shoulder pin (7). Discard cotter pin. 3. Remove screw (8), washer (9), spacer (10), two washers (11) and eyebolt (12) of turnbuckle (3) from generator (13). 0247 00-1