TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 418 of 1072
TM 9-2350-247-20-2 REPLACE GENERATOR DRIVE BELTS ADJUSTING LINKAGE (M548A1) — Continued 0243 00 REMOVAL 1. Remove lock nut (1), cap screw (2), and two spacers (3) from generator mounting bracket (4) and idler sleeve (5). Discard lock nut. NOTE Hold compression spring in compressed position during disassembly of idler sleeve from generator mounting bracket. 2. Remove idler sleeve (5) from compression spring (6). 3. Remove compression spring (6) from idler adjusting nut (7). 4. Remove lock nut (8) and cap screw (9) from idler arm (10) and generator mounting bracket (4). Discard lock nut. 5. Remove idler arm (10) from generator mounting bracket (4). 6. Remove lock nut (11) from cap screw (12). Discard lock nut. 7. Remove cap screw (12) from washer (13), adjusting rod (14), two retainer rings (15), two bearings (16), spacer (17), and pulley (18). 8. Remove idler adjusting nut (7) and lock nut (19) from adjusting rod (14). Discard lock nut. 0243 00-2