TM-9-2350-247-20-2 Unit Maintenance Manual Volume 2 M548A1 M548A3 Tracked Cargo Carrier Download
Page 412 of 1072
TM 9-2350-247-20-2 REPLACE GENERATOR DRIVE BELTS (M548A1) — Continued 0240 00 INSTALLATION NOTE Generator drive belts must be installed only in matched sets. 1. Install generator drive belts (3) on pulleys (4). 2. Adjust generator belts (WP 0241 00). 3. Tighten jam nut (1) against gauge nut (2) to lock in place. FOLLOW-THROUGH STEPS 1. Connect battery negative lead (WP 0292 00). 2. Start engine (see your -10). 3. Check generator belts for proper operation. 4. Stop engine (see your -10). 5. Install power plant rear access covers/door (see your -10). END OF TASK 0240 00-2